Crafted with Ingenuity

Time also functions as a craftsman.
We turn solid wood into large boards and spend a considerable amount of time strengthening the stability of the wood, which accounts for almost 90% of the entire production process. Because we want to give the large boards the longest possible use time.

01: Select logs
Our chief wood selector travels around the world to find wood. Unique logs with intact bark, few cracks in the heart, clear and smooth texture, and natural knots. We know that choosing wood with strong natural characteristics can inspire our designers more.

02: Selected wood boards
After selecting logs that meet our standards, we will conduct strict screening to select rough boards with intact bark, smooth natural edges, strong styling on the sides, few flaws on the front and back, and multiple textures. Among 5,000 rough boards, only less than 250 meet our standards.

03: Control the moisture content of the wood board at 12°
First, control the drying of the wood board for 30-90 days. This step can reduce the drying time and reduce the degree of deformation and cracking during drying.Then we will use drying equipment to slowly heat the wood board that has risen during the drying process to make the wood board flat. This step is to not burden the wood and to soften the wood fiber while stamping.After drying, the wood will go through a water balance stage of about 30 days to allow the moisture in the wood to reach a certain balance with the moisture in the air, and the finished product will not deform.

04: Cutting the wood board
Cut the edges of the wood board parallel and neatly. Our carpenters will discard the cracked and defective parts and only keep the most perfect appearance of the log.

05: High-frequency hot pressing
In order to ensure the flatness of the wood board and the uniform distribution of the moisture contained in it, the phenomenon of "warping" and "cracking" during use is minimized to the greatest extent.

06: Sanding
We use a sanding machine to plane the surface to ensure that there are no dents or waves on the surface of the wood.

07: Polishing
This step is done by hand by our carpenters. It takes a whole day for a carpenter to polish the surface of a table, adding fineness over and over again, and finally presenting a smooth and smooth visual appearance, just to make everyone who uses it more comfortable.

08: Coating
The bottom layer of paint can form a protective film 2mm above the wood surface, which plays a role in waterproofing, strengthening the hardness of the wood board, and fully showing the texture of the wood. The front and back sides use German imported Sykes wood wax oil, which is environmentally friendly and healthy, and has a long-lasting gloss and clarity.

09: Inventory
Each large board undergoes three years of maintenance and eight processes, and is strictly inspected and transported to the warehouse for natural balance. There are currently more than 1,500 table boards, which will bring the warmth and high-end beauty of extraordinary years.